Done-for-you nutraceutical factory setup
From an empty space to a running, GMP-ready supplement plant. We handle facility design, equipment, cleanroom, validation, commissioning, and operator training, all in one project.
Request a quote- One partner accountable from design to handover
- Built to EU GMP and ISO standards
- IQ/OQ/PQ validation and commissioning included
- Operator training before handover
Done-for-you nutraceutical factory setup
Indock takes you from an empty space to a running, GMP-ready supplement and nutraceutical plant in one turnkey project, handling facility design, equipment supply, cleanroom setup, utilities, validation, commissioning, and operator training. You own the production. We make sure it is designed, built, proven, and ready to run.
The journey: from an empty space to a running plant
A turnkey setup is best understood as one continuous path with clear phases. Each phase hands off cleanly to the next, under a single team, so nothing falls through the gaps:
- Design. We translate your products, capacity, and budget into a GMP facility layout and process flow, so people, materials, and product move without cross-contamination. See facility design and layout.
- Equipment supply. We specify, source, and supply the machines matched to your formats and volumes, then plan how they integrate into a working line. See equipment selection and supply.
- Cleanroom and GMP environment. We build the controlled space: air handling, classifications, finishes, gowning, and utilities that keep product safe and consistent. See cleanroom and GMP setup.
- Validation (IQ/OQ/PQ). We prove the plant performs through installation, operational, and performance qualification, documented to EU GMP. See validation IQ/OQ/PQ.
- Commissioning. We bring the lines into live, integrated operation and confirm the whole system runs as one, not as a box of parts.
- Operator training. We train your team to run and maintain the plant to GMP, so production starts on day one rather than weeks later. See commissioning and operator training.
- Handover. You receive a documented, GMP-ready facility with validation records and a trained team, ready to produce.
What turnkey setup covers
This goes beyond supplying machines. A complete factory setup brings together every piece that has to work as one system:
- Facility design and layout so people, materials, and product flow cleanly and to GMP. See facility design and layout.
- Equipment selection and supply matched to your products and capacity. See equipment selection and supply.
- Cleanroom and GMP environment setup with the right air handling and classifications. See cleanroom and GMP setup.
- Validation (IQ/OQ/PQ) that proves the plant performs. See validation IQ/OQ/PQ.
- Commissioning and operator training so your team can run it from day one. See commissioning and operator training.
- GMP certification support to get you audit-ready. See GMP certification support.
Why brands build with Indock
- One partner, one scope. You deal with a single team from design to handover, not a dozen vendors who blame each other.
- GMP-ready by design. EU GMP, ISO, HACCP, and cleanroom standards are built in from the layout up, not retrofitted later.
- Proven before handover. Validation and commissioning mean the plant is tested and documented, with trained operators, before you start production.
- Built for your products. Capsules, tablets, powders, softgels, gummies, or liquids: the layout and equipment are specified around what you actually make.
Own a factory, or use ours?
If you want to test demand or launch lean before committing capital, contract supplement manufacturing lets you produce under your brand without owning a plant. When you are ready to bring production in-house, a turnkey factory setup gives you full control. Many brands start with one and graduate to the other.
New to this? Start with the guide on how to set up a supplement factory, or pick a service below to go deeper.
How it works
-
Plan
We map your requirements: product types, target capacity, budget, and timeline. You get a clear scope before anything is built.
-
Design
We design the facility layout, process flow, and equipment specification so material, people, and product move cleanly and to GMP.
-
Build and equip
We install the cleanroom, machines, and utilities, integrating each line so the plant works as one system, not a box of parts.
-
Validate and commission
We run IQ/OQ/PQ validation, commission the lines, and train your operators so the plant is proven and ready to run.
-
Handover
You receive a GMP-ready, documented facility with the validation records and trained team needed to start production with confidence.
Explore nutraceutical factory setup
-
GMP-driven facility design and layout: planning material, personnel, and product flow, zoning clean areas, and sizing utilities so the plant works as one system.
-
Selecting and supplying the right machines for your products and capacity, then integrating them into a GMP production line as part of a turnkey setup.
-
Building the cleanroom and GMP environment: air handling, classifications, finishes, and flow that meet EU GMP and ISO standards for supplement production.
-
Design, installation, operational, and performance qualification (DQ/IQ/OQ/PQ) that proves your equipment and cleanroom perform to EU GMP, with FAT/SAT testing and the Annex 15 documentation auditors expect.
-
Bringing the plant online and training your operators so the facility runs safely and to GMP from the moment it is handed over.
-
Support getting your new plant GMP-certified: building to EU GMP, ISO, and HACCP, and preparing the facility, documentation, and team for audit.
-
A practical, step-by-step guide to setting up a supplement factory, from planning products and capacity through design, build, validation, commissioning, and GMP certification.
-
What drives the cost of a nutraceutical factory setup, facility size, cleanroom grade, products, equipment, validation, and certification, so you can scope a realistic budget.
-
What GMP requires of a supplement factory, facilities, cleanrooms, equipment, documentation, personnel, and quality control, and how a setup is built to meet it.
-
A straight comparison of owning your own nutraceutical factory versus outsourcing to a contract manufacturer, across control, capital, timeline, and margin, with guidance on when each makes sense.
Frequently asked questions
It covers the whole path from empty space to running plant: facility design and layout, equipment selection and supply, cleanroom and GMP environment setup, utilities, validation (IQ/OQ/PQ), commissioning, operator training, and support getting GMP-certified.
An equipment supplier sells you boxes. A turnkey setup designs the facility, integrates the machines with cleanroom and utilities, validates the whole system, trains your team, and hands you a plant that is ready to produce to GMP.
It depends on facility size, product types, and the state of your space, so timelines are best given as a range per project: think months, not years. We confirm a realistic schedule during the plan stage.
Brands and investors who want to own production, contract manufacturers scaling up, and companies bringing manufacturing in-house instead of outsourcing it.
Yes. The facility, cleanroom, and validation documentation are built to support EU GMP, ISO, and HACCP requirements, and we support you through the certification process.
Ready to build your own nutraceutical plant?
Tell us your specifications, target volumes, and timelines. We come back with verified suppliers and transparent landed pricing.
Request a quote
Tell us what you need: product, target volume, and timeline. We come back with verified options and transparent pricing.
We reply within 24 hours. Your enquiry stays confidential.